Create 

998 creative works found

• 

  So sad but true
  by Adrian Jeffs

• 

  LIVE
  by jess

  this is a thshirt i designed for my sister. the original had her name down the bottom. the words are a little hard to read so here they are… hope, dream, love, pray, live, feel, dance, listen, think, question, give create, see.

• How to create a 'Most Popular Viewed' link on your front page..
  by GerryMac

  I was recently asked by Kenart, how did I create the link on my front …

  I was recently asked by Kenart, how did I create the link on my front page that displayed the most popular viewed images that I have in my portfolio. I thought I would share how I created this just incase anyone else would like to know…. Here are the steps: 1. I have used the ‘tag’ system which are attached to each image that is loaded into RB. I made up a special tag, in this case ‘tp5’ (can be any name but must be unique and not used anywhere else on your site) 2. Now go through all your images, any image that has over ‘100 views’ click on the ‘edit’ link and add ‘tp5’ into the tag field. (you can use any number 50, 300, etc just what you feel is a lot of views to justify the image as being popular….) 3. Click the ‘Save Changes’ button (bottom of page) 4. Now go into your ‘view your public profile’ mode (mybubble >> overview >> view your public profile – from the list of links at the top right hand-side of the page) 5. Next, click on the ‘Art’ tab. 6. You notice on the left hand side of the page a list of ‘Related tags:’ The ‘tp5’ tag may or may not be shown here…. (not a problem if it is not) 7. Click on the ‘tp5’ or any any of the tags. 8. When the new page is displayed… go to the ‘Address’ field at the very top of the page, click in the field and highlight the whole address and copy it. It will look like this: (your username will be where ‘gerrymac’ is ) http://www.redbubble.com/people/gerrymac/art/everything/tags/tp5 9. Next go back to ‘MyBubble’ 10. Click on ‘edit my profile’ 11. Scroll down to where the ‘about you’ box is put your cursor in front of the very first word and press ‘enter/return’ a couple of times. 12. Now type in the following: Short-cut to the following:- “Most popular viewed” :http://www.redbubble.com/people/gerrymac/art/everything/tags/tp5 / Note: remove the space between viewed and the colon – if you don’t have the tag ‘tp5’ shown at the end of the line change it now to ‘tp5’ 13. Next click the ‘Save Changes’ button. 14. Now goto your ‘View Public Profile’ page and click on the link…. 15. So all you have to do now is monitor your images from time to time and when an image has reached your defined number of views i.e 100 use the ‘edit’ link and just add the ‘tp5’ tag – ‘save changes’ and your image will automatically be added to your most popular viewed! Note: I have noticed that not all of my tags are displayed in the ‘Related Tags’ list when I am viewing my images in the ‘Art’ area. If I want to create a link for a tag that is not shown…. Use the URL above and just substitute the last word with the name of your tag. (obviously make sure it also is your username and not gerrymac!) Sorry if this sounds a bit long winded but once you have done a couple you will see that it is quite straight forward and you can easily put your tag works right on the front page of your site….. Good Luck!

• 

  I'VE JUST CREATED A BIRD
  by J Velasco

  T_SHIRT / FROM JAPANESE SERIES / RISING SUN / / / SUMO / / / GEISHA /

• Profile How To
  by Gracey

  Almost every day I see people asking “how do I put pictures in my profile”. There are quite a number of tutorials on how to do this, and …

  Almost every day I see people asking “how do I put pictures in my profile”. There are quite a number of tutorials on how to do this, and here is yet another. This one explains how to use the image from your “preview/buy” page in your profile, and also gives an explanation for creating a profile with smaller images, like the one below. The tutorial is written in a pdf format (for windows PC users – sorry mac people, I wish I could put the instructions in for you) and includes full link texts (difficult to put into a journal on Redbubble because the code you need to type in converts to images unless you leave spaces) and some screencaptures to help along the way. Download it from here: Profile Pics Tutorial This is only one of many other tutorials on this subject. Some can be found in the community forums - This helpful one How to Add a Portfolio in your Email Signature can be found in the Learning Centre Community Forum Others can be found by searching (try searching for profile help, or profle tutorials), or by visiting the How To Redbubble Group Some of the tutorials in this group that are geared towards profile modification are: How To Make Sets in Your Profile by Craig Shillington How To Add Pictures to Your Profile by StacyLee How To Tag Your Work by Jo O’Brien How To Create a Most Popular Link for your Profie by GerryMac Linking Photos in Redbubble by Craig Shillington Buttons and Links to Sets by Craig Shillington Making Your Redbubble Profile Badge by webgrrl Not included in the How To Redbubble Group are these two handy journals by Helen Bascom: Creating Landscape Thumbnails the Correct Size How to Link Thumbnails If you have links to other tutorials relating to profiles or image links, please feel free to add it by leaving the link in a comment. And How to Add Buttons to Your Profile by Patricia Montgomery>

• 

  Create Your Own Riot
  by casualco

  This design is a playful pun of the old classic subbuteo where the 70’s kids instead of ‘flicking to win’ the game of football, is to take the opposition’s pub, aiming to get across from your end of the street and get in their boozer. / Using your tactics, nous and experience you can dodge the rivals and over zealous police and get yourself a proper result. Hours of fun can be had during the season. / You’d be gloating all about it the next day in school no doubt.

• TUTORIAL: Add Buttons To Your Profile Page
  by Patricia Montgomery

  *I recently had several requests for instructions on how to add buttons like the ones in my profile...

  I recently had several requests for instructions on how to add buttons like the ones in my profile. Rather than send individual bubblemail messages, I’m posting it in my journal in case someone else would like to add buttons to their RB profile. BUTTON INSTRUCTIONS Tip: print out this page and put it beside the computer before you start. You can make your own buttons or you can use a site called ButtonGenerator. If you decide to use this site and not to pay for a membership, you will need to add a link back to the site. I made all of mine 125X26 to give you some idea of the size of the ones on my page. This size allowed 3 buttons side-by-side. Make all your buttons and then save them in a folder on your computer. Then you will need to upload each button to your RB image gallery and use the “Hide” feature so that no one sees them but you. Once you have them uploaded you will need to right-click on each one to get the url address html code in the properties box. Example: http://images-0.redbubble.net/img/art/size:ularge/view:main/1407403-1-autumn-button.jpg Then go to “Edit Your Profile” to copy the image html code AND the tag html code – it will look like this (without the spaces): ! http://images-0.redbubble.net/img/art/size:ularge/view:main/1407403-1-autumn-button.jpg ! : http://www.redbubble.com/people/patmonty/art/everything/tags/autumn [REMEMBER NO SPACES. I had to add spaces so you could see the html code. If I had not added spaces, the button would have appeared in the journal instead of the code.] The last word in the html code is the “tag” word. In the example above it is autumn. You will need to put one space between each set of button html code. If you have a lot of buttons the language is long and wraps around forever. But with one space between each button html code, the buttons will sit next to other and then wrap to the next line. Now you will need to add the tag word to each of your images that will correspond to the buttons. Happy Button Making! UPDATE: Cool Text Graphics Generator is another good site for buttons. This tutorial was featured by the group, Tutorials on January 28, 2009. CLICK HERE FOR ALL TUTORIALS BY PATRICIA / Add Buttons To Your Profile Page / How to make a calendar / Downsizing those example images on your profile page / Adding Examples (Card, Laminated, Matted, etc) To Your Profile / Add photos to your profile description / Adding emphasis to your text / Plus more tutorials!

• The Easy Guide to Creating the Orton Effect using Photoshop - UPDATED
  by Peter Hill

  The aim of this Guide is to provide easy-to-follow step-by-step instructions to achieving the Orton Effect without the necessity of bei…

  The aim of this Guide is to provide easy-to-follow step-by-step instructions to achieving the Orton Effect without the necessity of being a Photoshop guru. I still call myself “new to Photoshop” and I have found a lot of tutorials on this topic assume a much higher level of knowledge than I have and are not very intuitive. I have revised the Tutorial to show a shortcut to the 2 Blending Option steps, which I only found myself after posting the original tutorial (doh), but I have left the long way as well, as you may wish to play around with the default settings applied by the short way. To achieve the Orton Effect you will be creating Layers, but don’t worry if you haven’t done this before. I hadn’t. The method I am about to describe is the simplest I have found. It’s not my method, but the description is all mine. When I have more time (yeh, right) I will revise this tutorial to include screenshots of the various steps. But for now, you might like to print this Guide and have it next to you while you create your first Orton Effect. I use Photoshop CS2 v9. The method described below originally came from someone using Photoshop Elements, so you can see this is not advanced stuff. The steps described below assume almost zero knowledge of Layering, and ignore other adjustments you might be making to the image, for example Sharpening the image before you start work on it (recommended). Step 1 Choose your image. Any image will do, you are just learning at this stage, but if you have that favourite flower shot or portrait – cool. Step 2 Open Photoshop. Open the image you have selected to be your first amazing Orton Effect image. Feel the excitement. This is your Background Layer. Step 3 Look for the Layer toolbox on the right hand side of the Photoshop work area. There should be a rectangular box with a small eye icon, a tiny thumbnail version of your image, and the word Background in italics. Right-click the word Background and select Duplicate Layer. A small box should immediately appear in the middle of your screen. It is asking you to Name the Duplicate Layer. Name this Layer Focus and click Enter. (Note: It doesn’t really matter what you name it, but Focus will do for our current purpose.) Step 4 There should now be a new rectangular box immediately above the original, and called Focus. (If there isn’t, stop, curse quietly, then try Step 3 again.) Pause now and look at the tiny eye icon. You will see that it is now the Focus layer on your screen, so this is the “copy” you are working on. OK, moving on ….. Right-click the Focus rectangular box and select Duplicate Layer again. This time when the naming box appears just click Enter because we will use the default name for this Layer, being Focus copy. Step 5 OK, now we are going to blend the Focus copy. There are 2 ways to do this – the long way and the short way. I will show you the long way first, just in case you want to go back and play with it after you get familiar with the process. Long way – Right-click the Focus copy rectangular box and select Blending Options. This will open a new box with lots of options. Ignore them for now. In the top part of this box you will find a window showing the Blending Mode and the default setting of Normal with a pull-down menu (A downwards arrow). Open the menu (left-click) and select Screen. Click Enter to close the box. OR Short way – look at the window which shows your layers. See the drop down menu at the top left, showing Normal as the default? Scroll down the menu and select Screen. The Focus copy layer should now have a bit of a washed-out look to it as a result of selecting Screen as the Blending Mode. (I have found that if the Screen effect still leaves a fairly good image, the Orton Effect will be enhanced. Too washed out and the Effect is diminished.) Step 6 Right-click the Focus copy rectangular box again, only this time select Merge Down (it’s near the bottom of the menu). This will collapse the Focus copy layer onto the Focus layer. Step 7 Right-click the Focus rectangular box again and select Duplicate Layer again. Name this copy Blur. Click Enter to close the box. Step 8 Now, find and open the Filter menu on the Tool bar running across the top of your screen. Select Blur. Another menu should open. Select Gaussian Blur (don’t ask). A new window should open. You will see a Preview of the image with a default blur Radius setting of 15.9. You can play around with the radius later. For now, just click OK to close the window as we will accept the 15.9 (I have found 15.9 to be right for most images anyway). The blur you are to achieve with this step should be enough to discern the shapes without the detail. Step 9 – The Magic Happens! This is the fun part. We now make one more blending option. Again, here’s the long way and the short way. Long way – Right-click the Blur rectangular box and select Blending Options. As described in Step 5, this will open a new box with lots of options. Again, ignore them for now. In the top part of this box you will find a window showing the Blending Mode and the default setting of Normal with a pull-down menu (A downwards arrow). Open the menu (left-click) again and this time select Multiply. Click Enter to close the box. OR Short way – Click on the same drop down menu you used to create the Screen effect, only this time select Multiply. You should now be able to see the Orton Effect! Step 10 If you want to accept the result, right-click the Blur rectangular box one more time and this time select Flatten Image (it’s the last option on the menu). This basically collapses all the layers into one final image and is the last thing you do in Layering. You can now save the image as normal. Does it look something like this? If it looks too dark though, you can adjust the Opacity level with the sliding bar before flattening the image. Look for the tiny Opacity tool in the top right of the Layering toolbox. But if you find you need to go below 90% the Effect is significantly lost and maybe it wasn’t the right image. Another option is to adjust the Fill and leave the Opacity at 100%. Have fun! I am. Peter

• TUTORIAL: How to make a calendar
  by Patricia Montgomery

  This tutorial is mainly for the bubblers that are new to navigating the RB site. The calendars are quite easy to create. The most i…

  This tutorial is mainly for the bubblers that are new to navigating the RB site. The calendars are quite easy to create. The most important thing to remember is that all images must meet the following requirements. Even one pixel below these numbers and it won’t work. 2182 by 1906 pixels for the main pages / 3271 by 2874 pixels for the cover page Click on “my bubble” Click on “calendars” (in the 2nd row of menu items) Click on “Add a new calendar” (right-hand side of screen) Add a title and description (optional, but recommended) Add your cover image (When you click on the little down arrow, it will bring up a list of titles of all the images in your gallery, even the ones that may be “hidden” or “not for sale”.) Then just start adding images, one for each of the twelve months. If you aren’t quite finished but want to save it, use the “Hide” feature at the bottom of the page. Then you can make changes without anyone seeing it. When you are ready to publish, then change to “Allow Anyone to View This Work”. I hope this is helpful. If you run into problems or still have questions, please don’t hesitate to let me know. Have a blessed day! / Patricia CLICK HERE FOR ALL TUTORIALS BY PATRICIA / Add Buttons To Your Profile Page / How to make a calendar / Downsizing those example images on your profile page / Adding Examples (Card, Laminated, Matted, etc) To Your Profile / Add photos to your profile description / Adding emphasis to your text / Plus more tutorials!

• TUTORIAL: Tee Shirt Helpful Hints
  by Patricia Montgomery

  _I am certainly no expert at making tee shirts. I know there are others out there who are the real experts. So I’m just going to share…

  I am certainly no expert at making tee shirts. I know there are others out there who are the real experts. So I’m just going to share a few helpful hints that came out of my struggles to get two tee designs uploaded on RB. Here’s what I did: Opened Photoshop Elements (or any other image editing program) and set up a new empty page. Set the dimensions to 2400 width x 3200 height with a transparent background. IMPORTANT NOTE: If the background is not transparent, it will not work! If you are one pixel off on the dimensions, it will not work! You cannot transpose the pixels either (NOT 3200 width x 2400 height) as it will not work! Transferred (copied) an image to the blank/transparent background. Added text to complete my design. Saved image as a .png file. NOTE: Other file extensions (such as .jpg) will not work! It must be a .png file! Uploaded to Redbubble with a default color and a default style. This will be the color and style (short-sleeve, long sleeve, etc.) you want to display on the page to showcase your design. NOTE: If you forget to choose the defaults, it will not work! Should I have a contest to see who can guess all the things I did wrong when I first tried to upload a tee shirt design? LOL! Don’t hesitate to let me know if you have problems or further questions. This tutorial was featured in the Daily Wrap on October 4, 2008. / This tutorial was featured in the group, Tutorials, on February 3, 2009. CLICK HERE FOR ALL TUTORIALS BY PATRICIA* Add Buttons To Your Profile Page How to make a calendar Downsizing those example images on your profile page Adding Examples (Card, Laminated, Matted, etc) To Your Profile Add photos to your profile description Adding emphasis to your text

• 

  Created by God
  by Terri Chandler

  This is the second of two shots that I humbly submit as my “Meeko series”. / These shots were taken with my Kodak Easyshare ZD710 digital camera and are totally “AS IS”. / I have not even made any adjustments for lighting. Meeko is my parents Presian/Himmy mix, whom they adopted several years ago. Meeko is a very large boy and weighs between 21 and 22 pounds as of his check-up this year. / He isn’t a young man anymore either; having reached the wonderfully healthy age of 11 years. Among the Leaves here: /

• TUTORIAL:Add a Slide show to your Redbubble Profile/Bubblesite
  by D R Moore

  Adding a slide show to redbubble Ok not really a slide show but it is very close, It’s an animated gif image. / You can see one ”...

  Adding a slide show to redbubble Ok not really a slide show but it is very close, It’s an animated gif image. / You can see one My Bubblesite These images can also be linked / Doing this will require you to have software that can make an animated gif image. / And of coarse I know of a free software program that can be used and this tutorial will explain how to do this using this free software. The free software is called / unfreeze and you can Get it here / Once downloaded and installed on your / computer we are ready to go. The first step is to get the images you want to include in your slide show, I am going to use my redbubble images set in frames for my bubblesite homepage. Sign-in to your redbubble account Click “My Bubble” then “Art” find the image you want to include and click the “show public view” Now click the “buy/preview” button / Select the product format you want to use Card, Laminated print, etc.. Then save the image to your computer. Internet Explorer users “Right Click” the image and select “Save Picture As” / Firefox users “Right Click” and select “Save image as” / And choose a location on your PC where you can find it easily. / You can use as many images as you want, but remember you want them to visit your gallery so keep the number of images to a minimum. / I’m going to use 8 images for now. / You can re size your images if you like the Unfreeze software will resize your images to fit in a 375 pixels(high) X 360 pixels(wide) box but the software will not center the image. For those that want their images centered in the box, Use your photo software to edit the images / The software program (unfreeze) that I recommended above requires the images to be in gif format. Doing this in your photo software may be different than mine. But I will open the image in my photo software “Paint.net” and then click the “Save as” option and change the format (type) to gif ( Graphics Interchange Format).They will be saved in the same folder that I put the ones I downloaded from the bubble. Once the images are in the gif format. We are ready to create the animated gif (slideshow) Open the folder where your gif images are located Start “unfreeze” a small window will appear / Drag your images into the white window Then set the delay on the right, I used 60, Make sure the “Loop animation” box is checked Now click the “Make Animated Gif” button Give it a name and Click “Save” To make the images change slower add more than one of the same file The image that I created here was made using three copies of the same image,delay set to 90 / Example: drag and drop “image1.gif”,then do it again drag and drop “image1.gif “ This one has four of the same images and delay set to 60 Now the image can be uploaded to a web site, since Redbubble does not support this file type. You can use “Dropbox” / which is a free file store, share, sync software Get it Here it allows you to have 2 gig of file storage for free. Plus when I change the slide show gif I just created dropbox will take care of the rest. / So changing my slide show is as easy as making a new one and saving it using the same location and name on my pc as the one I’m using now. / Now Insert the new image on your bubblesite or profile / Use the image location (web address,web url) with a ! before and after the image location / For more on Linking images etc. see this post How to Customize Redbubble / And your done. / You can also include these in your description boxes these have been reduced in size A great way to promote your calendars on your bubblesite remember these images can be linked to the buy page. / Happy Bubbling / Dan / Get the Firefox and Internet Explorer Tool bar for Redbubble Here / See more info See all my How-to’s Here Includes “Framed image on Bubblesite home page”, “Adding Calendars to your bubblesite”, “feedjit Live Traffic Feed”, “Using tags on Redbubble”, “Add a visitor counter to your bubblesite or profile page” and More © D R Moore This written work cannot be reproduced or posted on the web without my written permission

• 

  Kreatory Kat
  by kreatory

• The Easy Guide to Creating Samples of Artwork on Redbubble - UPDATED
  by Peter Hill

  Have you ever wondered how people add samples of stuff like this? !http://images-3.redbubble.net/img/art/border:blackwithdetail/produc…

  Have you ever wondered how people add samples of stuff like this? Want to do the same? Good! How well you present your work is a measure of the pride it holds for you and is a key driver of sales and the appreciation and interest of others. Due to popular demand, the aim of this Guide is to show how easy it is to insert artwork into a Comment, a Description, and even a Journal. Anywhere on RB you can write stuff, basically, you can include a pretty pitcha. I have written this guide in plain language, not IT guru nerds language. If you already know how to do this, please leave now. First, some key points: You can only show samples of artwork which have been already uploaded onto RB. You do not have to publicly show any artwork just to get a sample of it. You can remove an artwork from RB and this will not affect any sample of it you have already posted on RB elsewhere. When I say below do not leave a space between typed characters I really do mean do not leave a space. This is because you will be typing an instruction to the computer to go and grab the image and insert it in a specific spot and the computer can’t read spaces like we can. Ever noticed those Group Bubblemails with all that funny writing, like http: and .jpg! ? Those are examples of attempts to show samples done wrong. Usually it’s because they left a space! The point is: always check before you click Save or Reply and especially afterwards! (Memo to self: remember to check this posting!) Finally, this guide may seem long, but as Morgan Freeman said in Deep Impact, “It only seems that way.” Once you get the hang of it, creating samples will take mere seconds. Righto, here we go … mouses at the ready? Step One Upload the image you want to show a sample of, if you have not already done so. If the image you want to make a sample of is already on RB, go to Step Two but make sure the image is available for sale. If it isn’t, go into Edit and follow this step. When you upload the image (or Edit the upload), make sure you select Make this work available for purchase as a … and tick all the boxes. It doesn’t really matter if the image is too small for a poster. Just tick ‘em all and find out. As long as the image is at least big enough for a card, you can create a sample of the artwork in a card form. If the image is too small even for a card you cannot create a sample and you will have to go back and increase the size of the image and try again (hmmm, could be another tutorial there). Note: If you are uploading an image for the sole purpose of showing a sample of it, do not bother writing a Description or ticking any of the Group boxes, and make sure you tick Hide this work from others. Step Two Go to the Public view page for the artwork you wish to create a sample of. Pretend you are buying the artwork. Click the buy/preview icon to the right of the image because you will be creating your sample from one of the displayed examples of each purchase option. Step Three Decide which of the product options you want to use as a sample. Try a few different ones to see which is the one which really shows off the work. If the image size only allows for Small of anything, your best option usually is to choose a laminated print over a framed print because the actual visual size of the artwork in the framed print is generally too small. Step Four Once you’ve decided upon the type and specifications for the sample, Right Click once while holding the mouse over the image. A list of options should have appeared. At the very bottom of this list is the word Properties. Move the mouse over Properties and Left Click once. A new window should have opened. Halfway down the list of properties you will see Address: with the acronym URL immediately under it. This is the place on the RB big computer (server) where the pitcha of your sample product is stored – it’s address. (OK, all you tech heads are now cringing at my howler, but it’s ok, okaay :)) You need to copy the address and paste it (Step Five) in the exact place you want it to be shown. To copy the URL, hold the mouse over the start of the address, just to the left of the term http. When I say “just to the left” I mean right up against the “h” of http. The mouse needs to change from an arrow to a symbol which looks like a capital i in traditional font (Times New Roman). When that happens and with the mouse still right on that “h”, press and hold the Left mouse button and then, while still holding down the left mouse button, move the mouse straight down vertically. The address should now be highlighted. Keep moving down until the end of the address is within the highlighted area. The end of the address is always .jpg and you will always need to scroll down one line before you reach it. Now let go of the left mouse button, leaving the address highlighted. Keeping the mouse over the highlighted area, Right click once. Two options will appear. Select Copy (left mouse button). Now click on the Cancel icon at the bottom of the Properties window. This is just to close it. Step Five – Wallah! Now go back to where you want to show the sample. Let’s assume you are making a comment on a brilliant piece of artwork and you wanted to show a sample of it framed or laminated as part of your comment (the artist will love you for it!) All you need to do is Paste the address of the sample where in your comment you want the sample to appear, eg at the end. To do this, firstly Left click on that space so that the cursor is blinking. Now Right click once and select Paste. The address you copied in Step Four should now appear as part of your comment. (But it isn’t really). It must start with http and it must end with .jpg. If it doesn’t you need to delete what you just pasted and go back and re-copy the address and re-paste it. You are allowed to swear while doing so. Step Six – Really Important Before you hit the Reply button, you need to add the symbol that tells the computer to go get the pitcha. You must type this symbol once at the start of the address and once at the end of the address without leaving a space between the typed characters. The symbol is the exclamation mark. So, make sure the start of the address looks like this – !http – and the end of the address looks like this – .jpg! Now you can hit the Reply button. Step Seven – Really Really Important Check to make sure the linking worked. The address should have been replaced by the pitcha. But wait…there’s more You can create a sample of an image in its own Description in exactly the same way as I have described above. I normally do this by uploading the artwork, making it available to purchase as … whatever, but hiding it from public view. Then I simply go into the buy/preview page, grab the address of the sample, then paste it into the Description while still in Edit mode, then click on *Allow anyone to view this work before saving. Hope this guide answers a few questions for you! If so, you might like to also check out my guides to creating clickable images and creating links Any problems feel free to either bmail me or email me at peter_h111@msn.com. If you already know how to do all the above, please don’t feel the need to leave a comment, thanks. :)

• TUTORIALS:Bling Bling for bubbling
  by D R Moore

  Here is the Table of Contents for my How-to’s on Customizing your redbubble profile and bubblesite. / redbubble does not allow you to post…

  Here is the Table of Contents for my How-to’s on Customizing your redbubble profile and bubblesite. / redbubble does not allow you to post “HTML” (webcode) but here are ways to add things and get the custom look to make your profile stand out from the rest… Working with text [Formatting] / The basics of formatting text More…... redbubble Formatting [Text wrapping images] / Learn how to use tables to text wrap your images, align text / and more… Creating Links Etc…on redbubble / The basics of creating clickable text and images post them on your profile, in forums or on your bubblesite Adding Calendars to your bubblesite / Here is a way to add a calendar to your bubblesite with a link to the buy page Using Small Product Previews Quick (Redbubble) Search Bookmarklet Repeat post Time Saver Framed image on Bubblesite home page feedjit Live Traffic Feed Edit your Slideshow widget. Edit your Sales Widget… Using promotional image Banner Using tags on Redbubble Using a Paypal button on redbubble Add a Slide show to your Redbubble Profile/Bubblesite Visitor counter on your bubblesite or profile page Mapco visitor counter on your profile/bubblesite Redbubble toolbar / Host or Co-Host Tutorials Featuring the easy way Need more Help? / Chat with me on Skype User Name / envelope150 Happy Bubbling (with Bling Bling) / Dan

• TUTORIAL:Creating Links Etc...on redbubble
  by D R Moore

  Creating Text Links / To make your text clickable or link to a web address / Put quotation symbols ” ” on each side of the word/sentence …

  Creating Text Links / To make your text clickable or link to a web address / Put quotation symbols ” ” on each side of the word/sentence you want to make Clickable and then a Colon : (no spaces), Now put the url (web address) of where you want the clicker to go. / EXAMPLE: "View My Gallery":http//example.redbubble.com / Will give you this View My Gallery / You can also make a Text box appear when hovering over the link by adding text in brackets / Like this "View My Gallery(Go to My Gallery)":http//example.redbubble.com / The text above in ( ) will appear in a box if someone hovers over the link / Like this ( put your mouse over the link but do not click it ) / View My Gallery / To use formatting with your text link. Add a space between the formatting symbols and the “ / EXAMPLE: "Space*View My Gallery*space":http//example.redbubble.com / will give you this / View My Gallery Using images in your descriptions ,profile page,etc / First you must know where the image is located (web address) / Example: http://www.mypicture is here.jpg / To use a framed, laminated print, card etc.. image from redbubble click the “show public view” in your “Art” section / / then click the “Buy/Preview” Button / / Set the image as you wish to use it, Card, Framed print etc…once you are done follow the instructions below to get the web address If using firefox simply right click the image and select “copy image location” Using Internet explorer right click the image then select “Properties” A Properties box will appear copy the Address(URL) High lighted in blue / “right click” the Highlighted text then choose “copy” / or once it is highlighted hold the “control(CTRL)” key and press “C” You can now paste the image location in the location where you want to use it (right click and select “paste” or hold the Control key and press “V” on your key board) Now put a ! before an after the image location like this !http://www.mypicture is here.jpg! / To make it clickable or linked add the colon : and web address after the ! / like this :http://www.your going here.com / The final entry Will look like below / !http://www.mypicture is here.jpg!:http://www.your going here.com / The text box mentioned above can be used here as well by adding your text in ( ) / Like This !http://www.mypicture is here.jpg(Have a Look)!:http://www.your going here.com / Will give you this ( Put your mouse over image but do not click to see ) / Using Just the Image / To use only the image go to you art section by clicking “My Bubble” then “art” / on you art page find the image you want to use and get the image address or URL as described above / EXAMPLE http://images-3.redbubble.net/img/art/cropped/size:xsmall/view:main/2903258-2-magnolia.jpg = !http://images-3.redbubble.net/img/art/cropped/size:xsmall/view:main/2903258-2-magnolia.jpg! To change the size of the image replace the size:xsmall to one of the values shown on the right. / (Click the links for a preview of the size cropped version ) / xsmall = 60px × 60px / small = 135px × 135px / xmedium = 200px × 200px / medium = 300px × 300px / large = 550px × 550px / xlarge = 663px × 663px watermarked to use this one you need to remove the /cropped from the image URL Cropped Version / / Not Cropped / You can also remove cropped/ from the image address to maintain the shape of your image. / Note the sizes may vary depending on your image shape. / Here is a good example why you may want to remove the cropped/ from the image / Notice the cropped version cuts off the cards in his hands but doing this has changed the thumbnail size. To create a Larger preview link use some text or an image and link it to the xlarge view. / Here is an Image Example be sure to remove the /cropped from the xlarge view How it works The text I used !http://images-3.redbubble.net/img/art/cropped/size:xsmall/view:main/2412521-3-pink-rose.jpg(View Larger image)!:http://images-3.redbubble.net/img/art/size:xlarge/view:main/2412521-3-pink-rose.jpg To create a large product preview add /pixelsize:875×440 as shown below / Click here to see BEFORE and AFTER EXAMPLE (laminated print) URL: http://images-3.redbubble.net/img/art/backgroundcolor:d1d1d1/border:whitewithdetail/pixelsize:875×440/product:laminated-print/size:large/view:preview/2099882-6-resting.jpg / Click Here to preview larger size / Use youtube video on your profile just use the simple code below / youtube:video url or web address of the video Create a contact link or e-mail me link / Example: "contact me":mailto:myname@myemailaddress.com / Your bubblesite has a contact option, to turn it on / Go to your profile edit page Click here / then scroll down to the e-mail section / and click the box next to / Allow people to contact me via email / Allows visitors to contact you with a form on your BubbleSite. Your email address will not be displayed After you click it you can go to your bubblesite and on the top where the links are you will see these links / Home Gallery About Contact / Clicking the Contact link will open a new window with the Contact form / If you want to use it on redbubble then use the code below. / but change the username to yours / "Contact me by E-Mail":http://username.redbubble.com/contact / Contact me by E-Mail Leave me a comment if you still need some Help or Chat with me on Skype My User Name / envelope150 To use a Skype live status link copy and paste this text and change the username in bold / Leave two blank lines before and after the code |Chat with me on Skype| / |!http://mystatus.skype.com/balloon/username.png!|My User Name / username| Once you get the hang of creating links and posting images give my other tutorial a try. More…… redbubble Formatting [Text wrapping images] Beware this one will frustrate you Happy Bubbling / Dan Get the Firefox and Internet Explorer Tool bar for Redbubble Here / See more Toolbar info See all my How-to’s Here Includes “Framed image on Bubblesite home page”, “Adding Calendars to your bubblesite”, “feedjit Live Traffic Feed”, “Using tags on Redbubble”, “Add a visitor counter to your bubblesite or profile page” and More © D R Moore This written work cannot be reproduced or posted on the web without my written permission

• 

  Creative shopping
  by buyart

• TUTORIAL: More...... redbubble Formatting [Text wrapping images]
  by D R Moore

  This how-to will briefly explain a method of using tables on redbubble to Create sets, Text aligning, Text wrapping in Descriptions,Journ…

  This how-to will briefly explain a method of using tables on redbubble to Create sets, Text aligning, Text wrapping in Descriptions,Journals and profiles. There must be 2 blank lines between the table and other text (Press Enter two times before and after the table) To make a table insert a “|” (vertical bar) between the items to be contained in the cells. / The Examples provided below in BOLD can be copied and pasted. Then just replace the text with your links, images, text or whatever you wish. / For the basic text wrapped image use. / |text|image| / To put the title above the image use below / In order to keep a blank cell I will use   Text wrap an image | |Title w/ link| / |Description|Image w/ link| Preview Click Image to Preview it on my Bubblesite The Cattle Egrets is a popular bird with cattle ranchers for its perceived role as a bio control of cattle parasites such as ticks and flies. A study in Australia found that Cattle Egrets reduced the number of flies that bothered cattle by pecking them directly off the skin. It was the benefit to stock that prompted ranchers and the Hawaiian Board of Agriculture and Forestry to release the species in Hawaii Profile set w/ title or tag link / This also can be used in a Journal entry / For titles above the image use the table below / Note I used 6 size:xsmall images/ use size:small to match the ones already on your profile |”View my Set title or tag link”| |Title1 w/link|Title2 w/link|Title3 w/link|Title4 w/link|Title5 w/link|Title6 w/link| / |image1 w/link|image2 w/link|image3 w/link|image4 w/link|image5 w/link|image6 w/link| It will look like below or you can change the two lines and have the titles on the bottom. |image1 w/link|image2 w/link|image3 w/link|image4 w/link|image5 w/link|image6 w/link| / |Title1 w/link|Title2 w/link|Title3 w/link|Title4 w/link|Title5 w/link|Title6 w/link| View all images in My Bird Collection Screech Owl Missed a Spot Osprey II White Pelican My Girl Preening Flamingo Notice that several of my images have long titles that extend past the Xsmall image / One fix for this would be to press enter after the first word Example: |Title1 w/link|Preening / Flamingo| / |image1 w/link|image2 w/link| Preview My Girl Preening / Flamingo or Put the second word at the bottom / In order to keep a blank cell I will use   Example: \ |Title1 w/link|Preening| / |image1 w/link|image2 w/link| / | |Flamingo| Preview My Girl Preening Flamingo Looks great on your profile |image1 w/link|image2 w/link|image3 w/link| / |Title1 w/link|Title2 w/link|Title3 w/link| / Preview Jupiter Lighthouse Free Poker Lessons Missed a Spot No go forth and create that great description that really stands out more than the rest See this description on my Profile , Bubblesite This is a female Ruby-throated Hummingbird / Which is in the bird family Trochilidae, and are endemic to the Americas. They can fly backwards, and are the only group of birds able to do so. Their English name derives from the characteristic hum made by their wings.Which they can do up to 53 times a second. The extremely short legs of the Ruby-throated Hummingbird prevent it from walking or hopping. The best it can do is shuffle along a perch. To scratch its head and neck it raises its foot up and over its wing. Happy Bubbling / Dan See all my How-to’s Here Includes “Framed image on Bubblesite home page”, “Adding Calendars to your bubblesite”, “feedjit Live Traffic Feed”, “Using tags on Redbubble”, “Add a visitor counter to your bubblesite or profile page” and More Get the Firefox and Internet Explorer Tool bar for Redbubble Here / See more info Chat with me on Skype User Name / envelope150 © D R Moore This written work cannot be reproduced or posted on the web without my written permission /

• Creating Photomerge from Multiple image blending in CS3
  by Prasad

  Learn how to blend different pictures using layers, to create a digital montage : You don’t have to master every creative tool that Ph…

  Learn how to blend different pictures using layers, to create a digital montage : You don’t have to master every creative tool that Photoshop or Elements has to offer in order to make great images. In fact, just a basic understanding of the layers pallet and its range of Blending Modes can provide fantastic results. Here’s my methodology that created my gallery for Experimental & Alternative Process Photography. I have combined 4 images to create In her memories…...., two landscape photographs of Backwater Reflections #3, River Poems #1, a model portrait and a background image of land. Neither one is specifically shot for final resulting image. But with a little creativity and thinking I produced this image with increased significance and impact. As far what you put in your composite image ( digital photo montage ), that’s personal choice, but flat, simple subjects tend to work best. I suggest you to look around your home or nearby to find some interesting subject ( as for me in the background image of land which added a texture to final photograph ). Once you’ve got your images load them into Photoshop & let the fun begin! 1. Open start images with all desired images you want to blend. Ensure you have achieved desired level of processing with them, individually. / Now, make a NEW file ( Ctrl + N ). Input NAME, PRESET, WIDTH, HEIGHT, RESOLUTION, COLOR MODE, BACKGROUND CONTENT. Click OK. Your BLANK document will appear on screen. 2. Now, SELECT ( Ctrl + A ) the desired image for BACKGROUND IMAGE and COPY ( Ctrl + C ) on the clipboard. PASTE ( Ctrl + V ) on the BLANK document. 3. Follow the process with other images opened, to add TWO or THREE layers in the NEW file. 4. Pick the background image in the NEW file, then click all the “EYE” icons above it. It’ll deselect the layers. Press “D” to select as a foreground color. 5. Now, add another layer by ACTIVATING “EYE” icon the adjacent box, deselected earlier. 6. Start playing with BLENDING MODES, OPACITY and FILL. 7. First NORMAL and DISSOLVE you use rarely. DARKEN to DARKEN COLOR increase COLOR saturation and contrast. LIGHTEN to LIGHTER COLOR increase brightness, and make all black areas in the layer to disappear, allowing the layer below show through. This also helps you to select images with dark or black background. 8. As you come down one by one in the blending modes, intensity of the blending mode increases – Dark will be more darker and bright will be brighter. / 9. Use OPACITY and FILL to adjust blending composition to desired level. Don’t hesitate to use CHANNEL MIXER, HUE & SATURATION, SELECTIVE COLOR, LEVEL, CURVES tools as and when desired to get impact and toning with the desired layer. 10. To make the image more sophisticated try BLURR and DISTORTING some parts of it, because it is multi layered image it’s really easy to do, and it looks great. / 11. Now, FLATTEN the image finally. LAYER – Flatten Image. Save to desired file extention *.tif, *.psd, *.jpg. Usually, I prefer *.tif for original and then convert to *.jpg. I am thankful to my friend Sue for pushing me to write a tutorial for this image and making me to take a plunge in the deep ocean. I humbly say, I am not a Photoshop expert, I still have to go a lot distance but sharing this method will help many, as this form of art was one of my dreams and thought it might not be a reality for me. But it happened for me, and wish to happen it for many :) Prasad

• (Host Tutorial) Featuring the easy way
  by D R Moore

  If you are tired of rummaging through countless pages trying to feature a group member or an image that won a challenge and have so many …

  If you are tired of rummaging through countless pages trying to feature a group member or an image that won a challenge and have so many more pages to go and your mouse hand is cramped. Try this method. NOTE: This only works for groups that you Host / Co-Host / Also be careful in doing this as it will have the reverse effect on a featured image. / It will remove it from the featured section if it is already featured. / Be sure to visit the groups “overview” page to make sure your handy work has included all the images you wanted to feature. To feature Challenge Images / 1.On your groups “overview” page there is a link to your “featured work” section right click the link and select (with Firefox)”copy link location” (with internet explorer “copy shortcut”) / Now you are ready to feature some images the easy way / 2.Go to the challenge page that shows the awesome challenge winners that are about to be featured and while holding the control (CTRL) key left click the lucky images doing this will open them in new tabs in your web browser / 3.Now the fun part Clicking one of the new tabs that were opened will take you to the image page drop a comment if you like while you are there. To feature it in the address bar highlight the web address all the way to the word “art” then press and hold the control (CTRL) key press “V” to paste the address you copied in step 1 / or you can right click the Highlighted text and select ‘paste’ from the pop up menu. / Here is an example / Original address (the part in bold will be replaced) / http://www.redbubble.com/people/envelope150/art/2934496-2-egret-dock / Now the new address to feature this image would be / http://www.redbubble.com/groups/groupnamehere/featured_works/2934496-2-egret-dock / 4. Now just press enter (or click GO). / 5. Click the “feature” button on the confirmation page and your done. / You can close the tab and move on to the next one. / This also works for T-shirts / Example address (the part in bold will be replaced) / http://www.redbubble.com/people/envelope150/t-shirts/2478267-4-original-mobil-phone Feature a Group Member / To feature a group member go to their public profile page and click the “send bubblemail” link and in the address bar there is a number that you will need to feature the group member. / Example: The number below in bold is my number / http://www.redbubble.com/mybubble/conversations/new?recipient_id=14964058&return_to=%2Fpeople%2FEnvelope150 / Highlight and copy the members number / Go to the featured members link on the groups page / EXAMPLE: http://www.redbubble.com/groups/groupname/featured_users / and add the copied number at the end of the address in the address bar / Like this / http://www.redbubble.com/groups/groupname/featured_users/14964058 / Press enter and presto a featured member. Featuring Writings and Journals / also works by going to the members writing or journal page and clicking the work to feature and pasting the address like we did above. / Examples:replace the part in bold / Writing / http://www.redbubble.com/people/envelope150/writing/3092254-feature-me / Journal / http://www.redbubble.com/people/envelope150/journal/3092254-feature-me Happy Bubbling (Happy Featuring) / Dan Need More Help? / Chat with me on Skype User Name / envelope150 Get the Firefox and Internet Explorer Tool bar for Redbubble Here / See more info See all my How-to’s Here Includes “Framed image on Bubblesite home page”, “Adding Calendars to your bubblesite”, “feedjit Live Traffic Feed”, “Using tags on Redbubble”, “Add a visitor counter to your bubblesite or profile page” and More Please don’t Copy and paste this written work as that would really hurt my feelings :) / you can copy the code below and paste it if you would like to share with others on Redbubble "Featuring the easy way(Host Tutorial)":http://www.redbubble.com/people/envelope150/journal/2948588-host-tutorial-featuring-the-easy-way / or to share on the web / <a href="http://www.redbubble.com/people/envelope150/journal/2948588-host-tutorial-featuring-the-easy-way" title="Host Tutorial">Featuring the easy way</a> / or / /

• 

  i wear your thoughts... i wear your dreams...
  by mimi yoon

  dearest, / my every thought is you… / we’ll see each other in our dream tonight… . created on o6.o6.2oo9 / for Drawing Day . o6.o6.2oo9 / acrylic on canvas / 9”x 12” .

• How to create Selective colour image in CS3
  by Prasad

  Learn How to create selective color image in Photoshop - Many times selective color images convey the message more strongly than just …

  Learn How to create selective color image in Photoshop - Many times selective color images convey the message more strongly than just a color or monochrome image. Photoshop has provided the freedom to work on a color image to get final desired result. Although, nothing is predictable or can be planned to get good result in photography, the best out come or result is still depend on basic skill of human being – i.e. Creativity. Here is my methodology for SC processing - There is no thumb rule for an image used for selective color processing. You can use Portraits, Landscapes, Stills, Candid images, Macro or any of your choice. Once you decide to work on any image real PS fun begins. I selected Colors of Life for SC processing. 1. Open an image as a new file or copy of original image. 2. Make a duplicate layer ( CTRL + J ) 3. Convert the image to Black and White using Desaturate command. ( Image > Adjustments > Desaturate OR just press CTRL + SHIFT + U ) or the Channel mixer ( Image > Adjustment > Channel Mixer ). Color information of the original image will be removed and image will appear B&W. 4. While the top layer is selected adjust image resolution to 100% or just press ALT + CTRL + 0. 5. Now select History brush tool to retrieve details from original image. 6. Adjust brush size, opacity and flow to the desired level. ( This can be done by experimenting ). 7. Start painting on the area you want to bring back for color. 8. Since, it is a brush you can literally “bring back” only certain parts of the image by painting them. 9. Finally just FLATTEN the image. LAYER – Flatten Image. Save to desired file extention TIF, PSD or JPG Usually, I prefer TIF for original and then convert to JPG. I got the final result in Intent . . . . . . . I humbly say, I am not a Photoshop expert, I still have to go a lot distance but sharing this method will help many, as this form of art was one of my dreams and thought it might not be a reality for me. But it happened for me, and wish to happen it for many :) PS : You can create a copy of original background layer and experiment with blending options to create perfection keeping upper most layer as described above untouched. Prasad

• The Soft Sell - Creating Sales Through Non-Salesy Actions
  by selling

  You can reach a lot of people using the Internet, but creating personal and lasting relationships is a more difficult task. It requires a…

  You can reach a lot of people using the Internet, but creating personal and lasting relationships is a more difficult task. It requires an openness and reciprocity that doesn’t come easily to most people. Not that we artists don’t have the ability, but exposing ourselves emotionally outside of our art takes practice and a thick skin. There’s also a tension between wanting to sell our art and not wanting to be too salesy nor abuse others with self-promotion. So, how can we promote ourselves using a ‘soft sell’ or ‘no sell,’ yet create sales? Here are a few ideas that members have shared in the Selling Group. 1. Share information, help others, and give encouragement on RedBubble It’s easy to get mired in the minutia of everyday life. No one can fault you for addressing personal priorities and work, but it only takes a moment to comment on an artwork, t-shirt, or a bit of writing. Share your expertise or give another member an encouraging sentence or two about how their work made you feel. These activities help elevate your profile – and work – on RedBubble. The more people that view your work, the better your chance of receiving a personal referral. If you’re interested in sharing ideas or have questions about selling art, join the Sales/Sharing Group here. We don’t judge and we don’t bite. Also, check out the RedBubble site and individual group forums. 2. Network web-wide with kindred spirits Track yourself and your interests with Google Alerts and Google Blog Search, among other tools. Alerts and Blog Search help you find websites that have content related to your artwork, t-shirt designs, interest areas, etc. A practical example would be for the Game of Kings to track websites that talk about chess. Chess destinations and fans would surely be interested in learning more about a stellar collaboration featuring artwork about chess. Track them, and then contact them with a friendly head’s up about your work. 3. Add people to your RedBubble Watchlist, Favorite work, and Comment on work Here’s a case of quality over quantity. Discover new kindred spirits, curate your Watchlist, and make insightful and positive comments that spur conversion and relationships. These relationships can bring helpful advice, collaborations, and again, referrals. There have been a number of times that my work didn’t suit a friend’s aesthetic, so I referred them other RedBubble artists. I sent a quick Bubblemail to these artists to note my referral. It’s good karma, and the artists appreciated my thinking of them regardless of the outcome. 4. Publish a blog or website about your subject matter, geography, technique, etc. The key to a blog is updated content. Ask yourself if you can commit to updating at least once each week – if only to post a quote and a link to relevant resources. Readers can visit your website directly or subscribe to a feed of its content. Did you know that you already have a RSS (Real Simple Syndication) feed in your RedBubble profile? Just go to your Profile page, click on Journal, and then find the “RSS” button in the address bar of your browser. You’ll see a page like this one: Simply copy the RSS URL from the browser bar and add it to your iGoogle, MyYahoo, Feedburner, or other newsreader account. Outlook and Apple Mail accept feeds too. Here are a few members that have used their blogs and websites to drive sales on RedBubble: Matt Moylan and Lilformers Helen Nehill and Bowerbird Blues As well as, Ron Moss, Bryce Casselman, Diesel Laws, Soniei, among many others. Please post your blog/website below. 5. Develop a rapport with industry websites Giant caveat – DO NOT simply email a thought-leading website with a generic note and URL, e.g., “please highlight my t-shirt.” Try to develop a rapport with the author first. Start by reading their website. Make sure their content matches your artwork. Ask what it takes to be featured on their website. Send them occasional links to related articles unrelated to your artwork. You’ll make friends in no time. We previously discussed tactics for contacting periodicals, magazines, etc. here. RedBubble can help you find the best press contact for your announcement; learn more in the Sales Group PR forum. 6. Give a little, get a lot Everyone loves freebies, chotchkes – whatever you want to call them. Email a digital postcard to a friend or contact. Embed you message in your artwork and subtly note your URL in the email body copy. Create business cards or product cards. Here’s an example from the always-giving Nuh Sarche. Another way to share is to show works in progress. Sam Dantone is painting a wall mural. It’s not for sale, but I loved that he shared his progress on RedBubble. Whenever I think of costal scenes, I’ll return to this mural and then browse through his portfolio. I could go on forever, but I’m interested in the things that members have tried. Add you comments below, or join the conversation here. Thank you. Regards, / Jason

• 

  Waiting IV
  by DragonFlyer

  Are you there? Is anyone anywhere? Can you see me? Do you know me? Does anyone remember me? Am I even here at all? How, how can I tell if I am here…. or where… if anywhere? Created from all my own images. Please, as usual, click on the ‘view LARGE’... I think it may be worth the look :))) FEATURED IN ‘CORE’! FEATURED IN ‘SELF AS OTHER’!