Amp

2 members found

219 creative works found

Phthegma
by Dylan Reid

This was taken at a music video film shoot located in an old opera house.
Mousikê
by Dylan Reid

This was taken at a music video film shoot located in an old opera house.
Môha
by Dylan Reid

This was taken at a music video film shoot located in an old opera house.
Gingras
by Dylan Reid

This was taken at a music video film shoot located in an old opera house.
Enôidos
by Dylan Reid

This was taken at a music video film shoot located in an old opera house.
Phaskia
by Dylan Reid

This was taken at a music video film shoot located in an old opera house.
Helixis
by Dylan Reid

This was taken at a music video film shoot located in an old opera house.
Xuris
by Dylan Reid

This was taken at a music video film shoot located in an old opera house.
Opatros
by Dylan Reid

This was taken at a music video film shoot located in an old opera house.
Amped
by Aeyeduh

Inject the audi-siringe.
Amp Finder
by dummy

Sketch during coffee break.
19
by willowweepforme

Quebec @ Northcote Uniting Church Hall, 4/4/08.
Tubes Sound Good
by warrenlain

6L6GC Vacuum Tube (or Valve if you are from the UK)
marshall
by max gersbach

photo of my new mini marshall
practice
by eliamazor
The Valkyrie Guitar Tube Amp
by neoelegance

Here’s a poster design for a steampunk guitar tube amp I’m thinking of building. The chassis was inspired by a combination of an old tube radio from the 1930s I saw and a Victorian steamer trunk. body would be made from oil finished black walnut and brass with some sort of semi-sheer Victorian style fabric over the speaker. Overdrive, Bass, Midrange, and Treble knobs would be directly linked to the four gauges so that the needle would move higher or lower depending on the position of the knob. The center volume dial would be connected to a large disk similar to the frequency dials in some old radios that would indicate what volume the amp is set to. Switches for turning the amp and overdrive on and off. I’m also considering widening the amp to allow for two 10” speakers side by side instead of the single 15” in the design and possibly adding a second input channel. The top will more than likely have some sort of brass mesh or a brass plate with decorative elements cut into it to allow the glow of the tubes to be seen inside. I’ve gotta talk to a buddy of mine that has designed a number of tube amp circuits to see if I can convince him to work up a schematic for me.
Bass Feel
by 36524

For more works: deviantArt — Made with Photoshop paint brushes. / The smudge tool really pulled this piece to a finish. / Obviously. XD — You can tell by my line definition that I’m not going to make digital painting a career. But I’ve never done this before, so first I figured that I’d start with a simple outline, like the bass strings and my face shape, but otherwise, I just made it up as I went along. Because of that I messed up tons (I still didn’t get my skin color right, and I could’ve worked more on my hair) and it took two weeks to finish. ^ ^; — Bass Specs brand: Spector / model: NS body, Professional Series, Legend 5 Custom / scale length: 35” / neck: 3pc Maple, Graphite Rod Reinforced, Set-Neck design / pickups: EMG-HZ passive dual coil humbuckers It was so nicely finished in the factory that all that needed / adjusting was the truss rod, as the action was a bit low. / Good for slap bass, though.
Girl & Guitar
by Woodwose
Comrade Radio
by Moncs

this one took less than an hour which is a pb for me
Smash Amp
by RawHuman

If it’s broken…smash it. STOCK: Bits N Bob Stock by Hatestock
Brit Pop Amp
by Auslandesign

Inspired by British music of the last 45 years or so. Classic amp stack decorated with British motif’s
waiting to be played
by taffsnaps

Fender Strat and German make Engl amp just waiting to do what they do best !
Dirty Amp
by jimmynumba9

Ever want that really nice dirty gritty tone from your amp?
AMP
by Paul Cons

AMP is one of the landmark in Sydney’s central business district. I just took a quick shot of this building from this vantage point.