View from Below by Catherine Hamilton-Veal  ©
Clear

BEST VIEWED LARGER
Taken at Buckfastleigh, Steam Railway, Devon, UK.
While on a grand day out with friends and fellow bubblers
Richard, David, Sue, and David Aggpup.
This is the Train arriving back at Buckfastleigh station from Totness.
The BR Standard Class 2 2-6-0 is a class of steam locomotive, one of the British Railways Standard classes of the 1950s. They were physically the smallest of the Standard classes; 65 were built.
The design was derived from the Ivatt-designed LMS Class 2MT 2-6-0, with a reduced cab to enable it to fit into a universal loading gauge, and other standard fittings, most notably a taller chimney, others including the lack of an Ivatt dome and side plates connecting the two sections of the engine. Like the LMS predecessor the BR design had a tender cab to enhance crew protection and visibility when running tender-first. They were all attached to a BR3 type tender. These locomotives are often known by the nickname “Mickey Mouse”.
Darlington works was responsible for building the entire fleet of 65 engines and for a time construction of the LMS and BR designs overlapped. The last No.78064 was completed in 1956 but the class remained intact for just seven years. Coincidently the first to be withdrawn No.78015 was a Darlington-based engine.
Like the LMS counterpart, the Standard Mogul was arranged for a low axle-loading of just 13.75 long tons (13.97 t). This allowed it to operate on most lightly laid routes and secondary lines. Some of the class had speedometers fitted.
Among crews the 2MT 2-6-0 gained a reputation for being very sure-footed. Some maintained however that the engine did not steam well. The loudest complaint was about the draughty and dirty footplate. This was surprising given the efforts of Robert Riddles and his team to optimise working conditions in the Standards’ cab layout.
Two former Lancashire & Yorkshire Railway sheds, Bank Hall (Liverpool) and Wigan (L&Y), respectively designated 27A and 27D, received an allocation of the class. Bank Hall had 78041-4 which were used with great success on both slow and fast trains from Liverpool Exchange to either Preston, Bolton or Rochdale. The Wigan engines 78040/61-4 were used on stopping trains to Liverpool, Southport, Bolton and Rochdale. They replaced LMS 2P 4-4-0s and LYR 2-4-2Ts. On the former L&Y lines this class was generally employed on passenger work whilst the LMS class 2 2-6-0s were normally found on shunting and freight jobs until the mid 1960s. When the Cambrian section closed and other areas dieselised, other members of the class came to the former L&Y lines (some as replacements for those originally allocated to 27A and 27D). These included 78002 (in green livery), 78007, 78027 and 78057. Some of these were used on shunting duties from Bolton and Lostock Hall sheds. Number 78022 preserved on the Keighley & Worth Valley Railway had a spell as Preston station passenger pilot whilst allocated to Lostock Hall.
Four survived the cutter’s torch, these being 78018, 78019, 78022 and 78059.
78019, now preserved on the Great Central Railway in Leicestershire.
Ref Wiki.
Camera used Pentax K200D
Edited from raw in CS3 and Topaz B&W Opalotype Tea Green FallOff.
Thank you for viewing.


Comments

  • kenjmatcham
    kenjmatchamalmost 3 years ago

    Excellent image, love the finish.

  • Thank you ver much Ken for your kind comment.x

    – Catherine Hamilton-Veal ©

  • Catherine Hamilton-Veal  ©
    Catherine Hami...almost 3 years ago

  • Catherine Hamilton-Veal  ©
    Catherine Hami...almost 3 years ago

  • Tom Gomez
    Tom Gomezalmost 3 years ago

    Super processing Catherine, lovely image …

  • Many thanks dear Tom.x

    – Catherine Hamilton-Veal ©

  • Steve  Liptrot
    Steve Liptrotalmost 3 years ago

    Nice effect Catherine. Was here couple of weeks ago and saw Thomas! lol

  • Thank you very much Steve,yes i got a couple of shots of him.lol x

    – Catherine Hamilton-Veal ©

  • naturelover
    natureloveralmost 3 years ago

    This is really effective Catherine, superb work! x

  • Many thanks dear Pauline.And for the fave.x

    – Catherine Hamilton-Veal ©

  • missmoneypenny
    missmoneypennyalmost 3 years ago

    Beautiful image Catherine x

  • Thank yoso much dear Chris.

    – Catherine Hamilton-Veal ©

  • Roy  Massicks
    Roy Massicksalmost 3 years ago

    Another of those lovely engines Catherine. Great POV on this one. Terrific write-up too !

  • So pleased you like it dear Roy.Thank you so much.x

    – Catherine Hamilton-Veal ©

  • Aggpup
    Aggpupalmost 3 years ago

    Great work Catherine – I was going to put up almost the same shot

  • Thank you dear David for your kind comment.Please!! put it up my friend.x

    – Catherine Hamilton-Veal ©

  • andy551
    andy551almost 3 years ago
    gorgeous work!!!I’m impressed!
  • Many thanks dear Andy your very kind and for the fave.x

    – Catherine Hamilton-Veal ©

desktop tablet-landscape content-width tablet-portrait workstream-4-across phone-landscape phone-portrait
desktop tablet-landscape content-width tablet-portrait workstream-4-across phone-landscape phone-portrait

10%off for joining

the Redbubble mailing list

Receive exclusive deals and awesome artist news and content right to your inbox. Free for your convenience.